施工条件下CO2泡沫压裂液的对流换热特性
2016年12月21日 09:27 点击:[]
论文名称: 施工条件下CO2泡沫压裂液的对流换热特性
作者: 王树众,王斌*,林宗虎,王志刚*,张爱舟*,昝元峰*
来源出版物: 化工学报
年卷期页: 2004,55(3):468-471
收录类型: EI
论文简介: Foam fracturing is an important technology in the development of low permeability oil/gas reservoirs. The heat transfer characteristics of foam fracturing fluid are directly relevant to the calculation of pressure drop in the well, the optimum choice of fracturing parameters and the accurate evaluation of fracturing results. CO2 foam fracturing fluid behaves as a non-Newtonian fluid. The convective heat transfer characteristics of CO2 foam fracturing fluid were experimentally investigated on the newly constructed large-scale test loop under downhole conditions with CO2 in supercritical state, the pressure up to 40MPa. From the test data, corresponding correlations for convective heat transfer were obtained and the influences of pressure, temperature and flow rate were also studied. The convective heat transfer coefficient increased with the increase of temperature and flow rate, while the effect of pressure was much more complicated. In most cases, with the increase of pressure the coefficient tended to decrease.
原文链接: 施工条件下CO2泡沫压裂液的对流换热特性
上一条:水和酒精Marangoni凝结换热特性研究
下一条:沙粒跃移运动的动理学模拟
【关闭】