研究方向
多相流动与传热的理论和实验研究;
反应堆热工水力 ;
反应堆严重事故实验和理论研究;
多孔介质内的流动与传热
工作经历
2013.01 - 至今 副教授 西安交通大学,动力工程多相流国家重点实验室
2012.06 -2012.12 研究顾问 瑞典Sehgal 咨询公司
2010.06-2012.12 高级研究员 & 博士生副导师 瑞典皇家工学院核动力安全研究室, KTH/NPS
2008.06-2010.05 博士后研究员 瑞典皇家工学院核动力安全研究室, KTH/NPS(Royal Institute of Technology, Nuclear Power Safety Division)
教育经历
2001.09-2008.05 硕博连读 动力工程及工程热物理 西安交通大学,动力工程多相流国家重点实验室
1997.09-2001.06 本科 热能工程 湛江海洋大学(今广东海洋大学)
代表性论文
1 Liangxing Li, Xumao Zou, Jiaojiao Lou, Huixiong Li, Xianliang Lei, Pressure Drops of Single/Two-Phase Flows through Porous Beds with Multi-Sizes Spheres and Sands Particles, Annals of Nuclear Energy, Vol.85, 290-295, 2015.
2. Liangxing Li, Sachin Thakre, Weimin Ma, “An experimental study on pressure drop and dryout heat flux of two-phase flow in packed beds of multi-sized and irregular particles”, Nuclear Engineering andDesign, Vol.242, 369-378, 2012.
3. Liangxing Li, Shengjie Gong, Weimin Ma, “Experimental study of two-phase flow regime and pressure drop in a particulate bed packed with multidiameter particles”, Nuclear Technology, Vol.177, 107-118, 2012.
4. Liangxing Li, Weimin Ma, “Experimental study on the effective particle diameter of a packed bed with non-spherical particles”, Transport in Porous Media,Vol.89, 35-48, 2011.
5. Liangxing Li, Weimin Ma, “Experimental characterization of effective particle diameter of a packed bed with multi-diameter spheres”, Nuclear Engineering and Design, Vol. 241, 1736-1745, 2011.
6. Liangxing Li, Huixiong Li, Tingkuan Chen, “Experimental investigation on the moving characteristics of molten metal droplets impacting coolant”,Experimental Thermal and Fluid Science, Vol.32, 962-972, 2008.
7. Liangxing Li, Huixiong Li, Takeshi Kawai, et al., “Evaluation of the void fraction in the crescent-shape moderator cell of the CARR-CNS”, Physica B, Vol. 403, 2036-2042, 2008.
8. Liangxing Li, Huixiong Li, Jinfeng Hu, et al., “Study on void fraction distribution in the moderator cell of cold neutron source systems in China Advanced Research Reactor”, Physica B, Vol.393, 336-346, 2007.